Milestone 4: Which pcap file to use?

QBox Module 5
#1

Third line onwards: Use a previously connected pcap file for a normal connection termination between your laptop and the QBox host. Paste the packets that show a normal connection termination.
This is an instruction to do in module 4.
I cant understand which pcap file is meant here?
@amanagar, @chandra-kiran_crio, @Saurabh_Crio_TA

#2

You have to use that file which contains those packets that were created when you transmitted file from client to server.

#3

does it have to be one of the files we stored in analyzing protocol directory?
or can we just open and terminate connection and store that in a .pcap file and copy paste the packets?
I’m getting build failure which is my i’m asking

#4

or do we have to paste the packets from client_connection1.pcap itself?

#5

the .pcap you used just before the current one

#6

Well its mentioned that you have to use a previously connected pcap file

#7

still not able to clear. anymore formats i need to aware of?
i wrote the packets in a single line separated by a column

#8

only specify packet numbers. not packets. i got stuck on this for hours last night. the instructions are a bit vague.

Abnormal connection termination assessment failing
#9

also comma separate them. in a single line. from the pcap that you created when you monitored file transfer.

Milestone 4 Abnormal Connection Test Failed
#11

THANKS THIS WORKED!!!, i don’t know why it is mentioned in the faqs as copy the packets as texts and then paste it.


this was clearly misleading.

#12

@robsteneha which pcap file to use for mentioning the packet numbers?

#13

You need to use the file for which you captured packets during file transfer from client to QBox server.

1 Like
#14

@sg27, do you mean client_connection_file_transfer.pcap?

#15

You can give it a try. If it solved your problem plz upvote.

1 Like
#16

The last file you created for testing the file transfer

1 Like
#17

Yes this one is correct

1 Like
#18